1MM BTU test reports, third party test reports, and FAA standards test report available upon request.
Dimensions:
Approx Size: 295cm x 295 cm
Approx Weight: 5.7kg
Purchase Includes:
-
1 Fire Containment Blanket (Small)
-
Color: Off White / Bright Red 5cm webbing handles (every 1.5m around the perimeter)
-
Outer Material Melting Point: 1343(C)+
-
Seam Thread Operating Temp: 1093 (C)
-
1MM BTU Torch Tested: 15 min at 1800 F / 982 C (max cold side temp 3" above surface was 219 F) (Report available upon request)
-
3RD Party Tested: 1950(F) flame side. After 60 min, the hottest temp measured at 1.5" above the cold side was 213 (F). (Report available upon request)
-
Note: Outside layer resistant to most chemical reagents and corrosive agents
-
1 4" X 4" Vinyl Peel & Stick Placard "PED FIRE CONTAINMENT BLANKET LOCATED HERE"
-
This item’s representative materials conform to the requirements of Burn Test FAA 14 CFR 25, Appendix F (reports available upon request)
Good For Multiple Uses Depending On Fire and Abuse Load...
Please Note: Handle overheating batteries & electronic devices at your own risk. Fire Containment Bags, Fire Containment Blankets, and Smoke Containment Bags are tough! They are designed to add another course of action in the event of an overheating electronics battery. Brimstone products are designed to greatly reduce the risk of bodily harm & property damage, but due to the unpredictable nature of battery fires, the multitude of battery types, and the possibility of human error we cannot guarantee no harm or damage will result when using them. Once a product has been used to contain an overheating device please order a replacement immediately.
(FP-BL-1010-LW)
SKU | FP-BL-1010-LW |
Brand | Brimstone Fire Protection |
Shipping Weight | 5.7000kg |
Shipping Width | 1.250m |
Shipping Height | 0.100m |
Shipping Length | 1.250m |
Shipping Cubic | 0.156250000m3 |
Unit Of Measure | ea |